at STEIM

Research & Development at STEIM

prototype of Alex's hand controller

http://byungjun.pe.kr/xe/?document_srl=20814

2010.07.22 05:24:03

556

woodwork by Florian
for Alex Nowitz

You would..

List

No.	Subject
35		Juggling Sound Ball played by jugglers
35		video01video02video03sound and interaction programmed by Luuk Schipperheyn
34		Juggling Sound Ball v.1.5
34		- ATmega168, 8MHz- Speakjet sound module- Audio low pass filter- 3W audio amplifier- Xbee wireless module- on board 3-axis accelerometer- vibration sensing through piezo- Amp, Xbee, MCU, accelerometer power ...
33		Juggling Sound Ball silicone molding
33		parts list- Funnel with Xbee - speakjet- Xmini active speaker- piezo - power switch- inductive charging unitsilicone molding with QSil 2161st prototypespeaker got blocked by silicone leakage2nd prototypest...
32		Juggling Sound Ball prototype02
32		- battery operated(2 or 3 AA, 9v), or inductive charging unit- MCP1703, 3.3V, 250mA- ATMega328, 8Mhz- ISCP, or wireless programming through Xbee- on board 3axis accelerometer (MMA7361L) - speakjet sou...
31		Juggling Sound Ball prototype01
31		for Tom Johnson, photo by Frank Balde- wirelessly programmable- speakjet sound module- rechargeable LiPo batterydemo videofuture work- inductive charging system- design compact circuit- vandal proof, water proof
30		RFID research with Marc Boon
30		Marc Boon initial idea was finding potentials of RFID in performance domain. Marc supervised and worked together with me to test low frequency RFID reader. Thanks Marc!following is the Marc's repo...
29		Wireless Controller
29		for Richard Scott- 1Joystick, 12 buttons- 57600 Baudrate, wide range- for his left handfuture work- replace buckla stick to custom IR tracking device- right hand
28		iRobot programming
28		programmed to change songs and rhythm when it bumps.for Jesse Seay
27		wii modification
27		for Richard Scott
		prototype of Alex's hand controller
		woodwork by Florianfor Alex Nowitz

List

Write

First Page 1 2 3 4 5 6 Last Page